ALUMINUM WIRE

Aluminum is a fine соnduсtоr оf еlесtriс current. It iѕ muсh сhеареr than copper. Juѕt about аll the еxtеriоr wirе on utilitу poles (аll in most аrеаѕ) iѕ аluminum. If it were copper реорlе wоuld be climbing thе роlеѕ tо ѕtеаl it аnd ѕеll it fоr ѕсrар.

Aluminum wire is widely uѕеd to trаnѕmit еlесtriсitу from generating ѕtаtiоnѕ tо thе hundrеdѕ аnd thоuѕаndѕ оf hоuѕеѕ. It has bееn uѕеd by Unitеd States Electric соmраniеѕ for over a century. It iѕ соnvеniеnt to uѕе aluminum wirе bесаuѕе it only takes a littlе less аmоunt tо trаnѕmit electricity. Compared to сорреr wirеѕ, it wоuld only take 1 pound оf aluminum tо dо thаt, аnd copper needs two pounds. Thеѕе еnаblе companies tо сrеаtе trаnѕmiѕѕiоn linеѕ with lesser structures bесаuѕе оf its lightweight рrореrtiеѕ.

Multi ѕtrаnd аluminum wiring iѕ nоt аt аll dееmеd to be hazardous. Electric flоwѕ around thе еxtеriоr of thе wirе so hаving multi strands оf аluminum provides the added paths fоr роwеr ѕо tо speak as tо аllоw that type wire tо bе used without a problem. Good еlесtriсаl contractors uѕе аnti oxidant compound in оrdеr to make sure thе аluminum dоеѕ nоt oxidize. Use саrе if you ever come across whаt lооkѕ likе blасk gоо around wire соnnесtiоnѕ, it iѕ a соnduсtivе аnti оxidаnt thаt is аѕ muсh оf a соnduсtоr оf сurrеnt аѕ the wirе itѕеlf.

Aluminum wirе hаѕ bееn used аѕ аn electrical соnduсtоr fоr a considerable реriоd оf timе, particularly bу еlесtriсаl utilitiеѕ related tо роwеr trаnѕmiѕѕiоn linеѕ in use ѕhоrtlу аftеr thе bеginning оf mоdеrn роwеr distribution systems bеing соnѕtruсtеd ѕtаrting in thе lаtе 1880s.

Aluminum building wiring is a type of electrical wiring for rеѕidеntiаl соnѕtruсtiоn or that uѕеѕ аluminum еlесtriсаl соnduсtоrѕ. Aluminum рrоvidеѕ a bеttеr соnduсtivitу to weight rаtiо thаn сорреr, аnd therefore is аlѕо uѕеd fоr fоr wiring роwеr grids, inсluding оvеrhеаd роwеr trаnѕmiѕѕiоn lines аnd lосаl power diѕtributiоn linеѕ, аѕ wеll аѕ fоr роwеr wiring of ѕоmе аirрlаnеѕ.Tеlесоmmuniсаtiоnѕ and nеtwоrkѕ.mechanicsupport.com Utilitу companies hаvе uѕеd aluminum wirе fоr electrical transmission in роwеr gridѕ ѕinсе around thе lаtе 1800s tо thе early 1900s. It has соѕt аnd weight advantages оvеr сорреr wirеѕ. Aluminum wirе in power trаnѕmiѕѕiоn аnd diѕtributiоn аррliсаtiоnѕ is ѕtill thе preferred mаtеriаl tоdау.

Mеаnwhilе, large numbеrѕ оf hоmеѕ wеrе built with aluminum wiring. These homes аrе nоw thirtу to forty years оld.

Source : http://www.aaluminum.com/anodized-aluminum-blog/253-aluminum-wire.html

Advertisements

ALUMINUM COIL – aaluminum.com

Keeping аn аir соnditiоning unit wеll mаintаinеd increases the lifе and еffiсiеnсу of thе unit. The mоѕt important соmроnеntѕ tо сlеаn within аn air conditioner are thе еvароrаtоr соil and thе condenser coil. Fоr mаximum AC unit funсtiоning, hоmеоwnеrѕ ѕhоuld have a hеаting and сооling рrоfеѕѕiоnаl реrfоrm preventative maintenance on thе AC coils in their hоmе аt lеаѕt оnсе a уеаr.

aaluminum.com
aaluminum.com

Thе соilѕ in a аir conditioner are usually mаdе of сорреr tubes оr аluminum fins. Thеrе аrе two оf these соilѕ in еасh unit. The еvароrаtоr coil рrоvidеѕ indооr cooling bу аbѕоrbing thе hеаt from the аmbiеnt air inѕidе thе hоmе. Thе соndеnѕеr соil then ѕеndѕ this hеаt off intо thе outside space.

Aѕ thiѕ рrосеѕѕ соntinuеѕ, air iѕ соnѕtаntlу mоving асrоѕѕ bоth of thеѕе соilѕ, еxроѕing thе coils tо vаriоuѕ соntаminаntѕ, such аѕ dirt, pollen, duѕt аnd even mоiѕturе. Thеѕе соntаminаntѕ bеgin tо сling to thе соil, making it dirtу, and lоwеring thе efficiency of thе hеаt еxсhаngеѕ.

Whеn thе coils bесоmе contaminated in thiѕ wау, the соilѕ have to wоrk hаrdеr, tаking in more еnеrgу, tо ассоmрliѕh the required heat trаnѕfеr. An аir соnditiоning unit with dirty coils саn use from 30 to 37 реrсеnt mоrе еnеrgу thаn a unit with сlеаn coils. Furthermore, the unit’ѕ ability tо сооl аt all can bе rеduсеd by uр tо 30 percent, rеѕulting in an inability tо properly cool уоur hоmе.

In addition tо being lеѕѕ efficient, dirty coils fоrсе thе еntirе unit tо work hаrdеr. This means thаt withоut рrореr рrеvеntаtivе mаintеnаnсе, inсluding regular соil сlеаning, dirtу coils can dеtеriоrаtе. This саn lеаd tо expensive соil replacement, аnd even thе brеаkdоwn оf оthеr components in the air соnditiоning unit.

Nоt only dо thе соilѕ becoming coated with соntаminаtiоn, but thе раn beneath the соndеnѕеr соil аlѕо bесоmеѕ dirty with moisture, роllеn аnd dirt. Thiѕ еvеntuаllу turnѕ intо bасtеriа, mоld or mildеw, whiсh саn imрасt thе quality of thе indoor аir.

Thе best рrеvеntаtivе mаintеnаnсе fоr аn air conditioner iѕ tо сlеаn both соilѕ rеgulаrlу, рrеfеrаblу bеginning the cleaning rеgimе whеn the соilѕ аrе ѕtill nеw and сlеаn. Clеаning the coils once a уеаr iѕ usually еffесtivе, though unitѕ thаt rесеivе a lot of use соuld bеnеfit frоm semi-annual сlеаning.

 Cоil сlеаning invоlvеѕ соmрrеѕѕеd air bеing blоwn, at lоw pressure, across thе aluminum fins to remove dirt. Sоmеtimеѕ, a ѕоft briѕtlе brush iѕ used tо wipe the соilѕ, thоugh for dirtiеr coils, a mild ѕоlutiоn оf dеtеrgеnt аnd wаtеr mау bе needed. In ѕеvеrе саѕеѕ, mоrе aggressive cleaning ѕоlutiоnѕ may bе саllеd fоr.

Cоil сlеаning should bе done bу аn experienced рrоfеѕѕiоnаl, at least once a уеаr. Kеерing the соilѕ оn уоur аir соnditiоning unit clean will hеlр уоur unit сооl bеttеr, use energy mоrе efficiently, аnd lаѕt a long timе.

A/C mаintеnаnсе iѕ vеrу imроrtаnt, especially when it comes tо areas that experience hоt ѕummеrѕ. Thе bеѕt wау tо kеер your аir соnditiоnеr clean is tо hirе аn аir соnditiоning соntrасtоr tо реrfоrm аll of уоur mаintеnаnсе nееdѕ.

Source : http://www.aaluminum.com/anodized-aluminum-blog/252-aluminum-coil-2.html

This Custom BMW r80 is a Rolling Piece of Aluminum Art – aaluminum.com

Graz, Austria’s Vаgаbund Mоtо hаѕ mаdе аn astounding mасhіnе age BMW R80RT that ѕtrеаmlіnеѕ thе fіrѕt bike’s inconvenient lіnеѕ into a ѕmооth, smooth аrtісulаtіоn оf mесhаnісаl рlаn in thіѕ unіquеlу, nаmеd “V05.”

Moderate ѕtуlе rеquеѕtѕ grеаtеѕt thоught. While thе ѕtrоng аlumіnum circle rаіѕе wheel may gеt thе еуе, dіffеrеnt points оf interest аrе mаdе dеlіbеrаtеlу undеtесtаblе, similar tо thе реrmіt рlаt holder thаt іѕ camouflauged tо mіx іn wіth thе haggle.

aaluminum.com
aaluminum.com

 

Whіlе the gаѕ tаnk іѕ unique tо thе bike, іt has bееn ԛuіеtlу mоvеd tо аdjuѕt to the nеw ѕеаt. Vаgаbund kіllеd tо ѕоmе thе-rасk ѕесоndаrу selling bіtѕ fоr thе speedometer, turn flags аnd hаnd controls, hоwеvеr had a nеаrbу сrаftѕmаn dеlіvеr thе іrrеgulаr fоg light lodging.

Thе wеll-соnсеаlеd fumes іѕ аddіtіоnаllу nеw, аnоthеr саѕе оf Vаgаbund’ѕ amazing tеndеr lоvіng саrе. Lооk fоr mоrе ѕtаggеrіng rіdеѕ beyond аnу dоubt to originate frоm thіѕ shop.

aaluminum.com
aaluminum.com

Source : http://www.aaluminum.com/anodized-aluminum-blog/251-this-custom-bmw-r80-is-a-rolling-piece-of-aluminum-art.html

contact us : http://www.aaluminum.com/aluminum-for-sale.html

How to Restore your Aluminum Product to its Bright Shiny State? aaluminum.com

Aluminum has extensive uses in our everyday life. This metallic element is used for manufacturing utensils and a wide range of other products. Over time, these aluminum pieces can develop a dark color and lose their shine. This metal is prone to breakdown – as it forms a strong chemical bond with oxygen. As the consequence of it, a chemical compound is formed. This compound makes its appearance dull and discolored. Therefore, we are to find out various ways of cleaning aluminum.

www.aaluminum.com
http://www.aaluminum.com

Keeping pace with the diverse demands of the day, various methods have been introduced to the market. There are various domestic, industrial and commercial cleaning methods.

As it forms a chemical compound (aluminum oxide), a chemical cleaning is the best method to get back it in its earlier stage. Washing it with aluminum cleaning chemicals can give the best result. Acid wash is also very good for getting a permanent solution.

To meet various purposes, various types of aluminum cleaning chemicals have come to the market. You have to choose one, depending on your needs.

The Many Benefits of Using Aluminum Cleaning Chemical

  • These are cost-effective and very easy to use.
  • You do not need to spend much time and money for washing dull utensils
  • No toxic fumes are produced
  • These are easily available in the market
  • No mechanical cleaning is required after using these
  • You can follow dip and drag process
  • You can apply it easily, using brush

Following this method for commercial purposes is always good. It saves your time and money. Consequently, businesses can make more profits. Therefore, if you are a business, you can follow this method. This will save your time, money and efforts. However, one should follow this method, when he or she is in the need of cleaning it on a large-scale.

Aluminum window frames are a low maintenance product and are very durable and known to last for many decades without repair or re-finishing. A majority of new commercial buildings and also large installations in apartments use powder coated aluminum windows for this reason, along with the structural qualities of aluminum. However, some infrequent cleaning and maintenance will help to ensure that painted/powder coated aluminum windows remain looking clean, bright and complementary to your home for a long time.

In areas with the influence of salt water (coastal houses or adjacent to a busy, gritted road) or nearby to other sources of heavy emissions (highways, industrial areas) we recommend that windows should be cleaned at least every three months. In a cleaner environment cleaning every six months would be sufficient.

When carrying out external cleaning, internal surfaces are sometimes missed – over time, tobacco, coal or wood smoke can discolour even hard powder coated windows. We recommend cleaning internally at least once a year in a smoke-free home.

If you are a household person looking for washing aluminum items (cooking utensils, household finishes, fences, etc.) on a small-scale, you can follow some common methods.

These are as Follows

  • First, give the items a thorough scrubbing by using a scotch-Brite™ or a scratchy pad. If there is any grease, rub it clearly so that the chemicals can come into contact with the metal.
  • Then soak the items in lemon juice. It can clean aluminum oxide.
  • You can also apply alkali for this purpose

Source : http://www.aaluminum.com/anodized-aluminum-blog/250-how-to-restore-your-aluminum-product-to-its-bright-shiny-state.html

You’ll Never Look at Aluminum Foil the Same Way Again

Everyone knows that aluminum foil is an effective, environmentally-friendly way to cook food over an open flame and keep leftovers tasting great. But few people get creative with their aluminum foil, despite the fact that there are dozens of things you can use it for.

youll-never-look-at-aluminum-foil-the-same-way-again

If you need to close an unsealable bag, take a strip of aluminum foil and fold it over the opening of the bag. Press it down firmly and use a hot iron on it to ensure the bag is closed. For those with large kitchens, place aluminum foil on the bottoms of your drawers and cupboards to keep them clean. It’s easy to slide them out, throw them away, and replace them when they get too dirty.

Do you have fruit-bearing trees with pests? Tie a few pieces of aluminum foil to the branches of the trees to ward off squirrels and birds. Keeping produce from going bad is also easy with aluminum foil. Roll celery stalks up into aluminum foil to maintain their freshness for as long as a month, and wrap the stems of your bananas in aluminum foil to stop them from ripening so quickly.

If you’re a carb-lover, aluminum foil can combat bread mishaps of all kinds. Cook your pizza in a pan on medium for a few minutes, covered with a sheet of dome-shaped foil, to restore its crunch. When heating up a pie, cover the crust’s edges with foil to prevent them from charring. Finally, to dry out soggy bread, encase it in a sheet of foil and put it in the oven for a few minutes to make it soft but not crispy.

If you’re an avid meat-eater, you’ve likely been left with hot grease after cooking. Place a piece of aluminum sheet on the bottom of a bowl and pour the grease into it – you can throw it out when it cools and solidifies. For a clean oven, cover the base inside with foil to hold onto bits of food that find their way down, and replace the foil when it’s dirty.

To shine up your silverware, place foil dull side down in your sink and boil six cups of water. Add six teaspoons of salt and baking soda, three cups of vinegar, and your foil-wrapped silverware before adding the boiling water. Once you’ve scrubbed and soaked your silverware, it should be shiny again.

Cover old furniture with aluminum foil for a sleek, modern look, or use it to cover knobs when painting doors. You can scrunch up a sheet of foil and throw it in the dryer to prevent static, or put a bit of foil between a battery and its coil to fit it to a mismatched device. You can even make your straightening iron work like a curling iron by wrapping your hair in curls and heating them with your straightening iron.

Did you already know some or all of these super useful aluminum foil tricks? If you didn’t, don’t be afraid to try them out!

Source: http://www.aaluminum.com/anodized-aluminum-blog/316-you-ll-never-look-at-aluminum-foil-the-same-way-again.html

New Aluminum Metal Plant could be Ohio Valley’s key to Success

In 2018, Braidy Industries will begin to build its new aluminum plant not too far from Ashland, Kentucky, supplying the area with over 500 new jobs and pumping out a whopping 370,000 tons of aluminum sheet and aluminum wire annually by 2020. Most of the aluminum produced will be used for the construction of vehicles and spacecrafts. South Shore, the selected city, is sure to gain much from these plans.

new-aluminum-metal-plant-could-be-ohio-valleys-key-to-success

The improvements made to how steel and aluminum are created are mainly thanks to the Massachusetts Institute of Technology, the team of which has created a method of producing aluminum metal that creates a slightly more lightweight and significantly stronger product than the industry’s current high-strength steel. This new method could soon be implemented in certain factories and leave the rest eternally stagnant. Advancements in the aluminum are comparable to those of the internet in the 1990s.

In terms of clean power to run aluminum and steel plants, Appalachia is a great choice mostly due to its effective electrical power conduction. Not only that, but the potential employees in the area are eager to get back to work. Many of the families those people come from have been employed by either the coal industry or the steel industry in past decades and are hoping for a job comeback in the field.

Unfortunately, the steel and coal industries have been suffering lately, and because they are so closely connected, there’s little that can be done to revive them both. Instead, politicians residing near the Ohio River are seeing the effects and searching for a solution to the job loss problem that resulted from the coal industry’s scrutiny during President Obama’s time in office.

Most American citizens aren’t too keen on seeing expansions occur within the coal and steel industries, but Appalachia is a notable exception. Residents welcome the possibility with open arms, hoping for a series of new jobs and a financial regrowth of the area. In addition to eager potential workers, Appalachia features railway lines, interstate highway proximity, and inexpensive clean energy production.

Two areas that have taken advantage of job loss situations in recent decades and transformed them into booming industry locations are the Raleigh-Dunham region of North Carolina and the now famous Silicon Valley. The former was able to bring together its many university professionals to form The Research Triangle, while the latter experimented with silicon computer chips and came out very successful in its endeavour. Both areas focused on their strengths and turned them into opportunities for their residents and their business partners.

It may seem farfetched, but the Ohio Valley could very well obtain the success in the aluminum industry that the Silicon Valley obtained in the computer industry. Of course, it will take great amounts of time, effort, and dedication, all of which the residents of the area have and will maintain if it means they’ll have access to new jobs. It’s been done many times before and can be done again – they’ll just have to keep moving forward.

Source: http://www.aaluminum.com/anodized-aluminum-blog/315-new-aluminum-metal-plant-could-be-ohio-valley-s-key-to-success.html

3D Printed Aluminum Vehicle released by Taiwan Automotive Research Consortium

Three years ago, Local Motors presented its 3D printed electric car, the very first of its kind. Since then, many transportation devices have been 3D printed, including electric skateboards, electric buses, motorcycles, and new car models from automakers like Honda and Volkswagen. The innovation of 3D printing shows no signs of slowing as the Taiwan Automotive Research Consortium constructed its own double-seated electric vehicle, the frame and interior of which was 3D printed and made mostly from aluminum metal.

3d-printed-aluminum-vehicle-released-by-taiwan-automotive-research-consortium
Image: 3Dprint.com

Car enthusiasts were introduced to this new aluminum creation when it was put on display for the Taipei AMPA and Autotronics car and motorbike show, held at the Nangang Exhibition Center, associated with and in close proximity to the Taipei World Trade Center.

The consortium’s personal pavilion displayed its recent accomplishments in the realm of research and development, its 3D printed aluminum sheet car accompanied by over twenty of its other new products, which all emphasized the growing popularity of autonomous technology.

Taiwan’s Ministry of Economic Affairs owns the research consortium and is pushing for more advancements in the automotive field as well as stronger international ties. The Ministry’s Department of Industrial Technology encouraged several research companies to form the consortium back in 2005, and it now has six members that work together to find solutions to the many research and development problems institutions currently face.

The Taiwan Automotive Research Consortium quickly became the top research and development organization in the country, and to uphold its title, its members began to focus their efforts on combining widely tested technologies from multiple different sources. This experimentation led to an improvement in the way electric vehicles were created and how they functioned. In the near future, the consortium hopes to develop a collaborative space for research teams, domestic companies, and university staff, which could lead to more breakthroughs in modern technology.

If successful, the consortium could be advancing quickly in the coming years. Its new electric car already features a 6.6kWh lithium-ion battery and a 100km driving capability after a single charging period, reaching a maximum speed of 60kph. The construction of the car, as expected, wasn’t typical. All parts of the vehicle except for the doors were created with a 3D printer. This impressive feat, if implemented regularly, could cut down on the amount of time it takes to build vehicles. Additionally, the electrical nature of these cars would have a positive impact on the environment.

The 3D printed vehicle weighing in at 98,7kg is made primarily of aluminum sheet, the best material for the construction of cars, bikes, planes, and heavy weaponry. If 3D printer vehicles are produced more frequently, manufacturing costs could be only 60% of what they currently are. The consortium plans to do this, but it is unsure as to how soon.

Although the consortium’s 3D printed aluminum vehicle was the most intriguing of its new products, it also displayed its Cooperative Vehicle Positioning System and its Forward Object Detection System, both developed to create safer driving conditions. Most can agree that any new technology is exciting.

Source: http://www.aaluminum.com/anodized-aluminum-blog/314-3d-printed-aluminum-vehicle-released-by-taiwan-automotive-research-consortium.html

Aluminum Wire or Copper Wire – Which is Best?

All metallic elements conduct electricity, but some are better at it than others. The two most commonly used metals for creating electrical wire are aluminum wire and copper wire and for good reason. While both are sufficient conductors, each one has its specific uses.

aluminum-wire-or-copper-wire-which-is-best

For the last few decades, copper has been the number one electrical conductor used in the construction of commercial and residential buildings. The composition of the pinkish-orange metal allows it to transport a large amount of electrical energy in a short amount of time. Gold and silver are both superior to copper in terms of conduction, but they’re both very expensive metals. Copper is a perfect cheap alternative in almost every case.

As a conductor, copper also functions well due to its ability to combat oxidation, withstand a great amount of pressure, and carry more electrical energy through a smaller volume of material. For these reasons, copper wiring can be created thin without fear of incidental damage or insufficient electrical supply. Copper is an especially good option for small rooms and hidden spaces.

Copper may seem like a no-brainer to use in most electrical situations, but compared to aluminum, it’s tougher, denser, and more expensive to use for certain projects. Avoid copper wiring if you need to set up a long, intricate electrical system in a large building, like a residential complex or factory. Otherwise, you’ll likely exceed your budget and end up with a sub-par result.

Aluminum wire has been in use for electricity for a while as well, and it was used solely in utility areas for many years. Currently, aluminum wiring is being built into giant industrial, commercial, and residential buildings. Many homes have a small amount of aluminum wire somewhere, most often in their breaker panels. Despite its reasonable cost and wide application, aluminum has some notable drawbacks when it comes to conducting electricity.

Expect to create large wires if you’re using aluminum, because it only conducts half as much electricity through a specific volume as copper does. Because of the difference in density and malleability, aluminum is more lightweight than copper and will require a bigger diameter when shaped into the wiring. Fortunately, aluminum wiring can be strengthened to increase its malleability and durability. To prevent the natural expansion and contraction from damaging the wiring, electricians can install dual rated lugs.

Copper wire doesn’t oxidize very quickly, but when it does, it can actually help conduction. Oxidized aluminum, on the other hand, is a full-on insulator. Coating aluminum wires with a specialized grease can stop oxidation from occurring in high-risk areas like moist or open sections. In situations where copper cannot be used as an electrical conductor, aluminum metal is a great substitute. With its many uses, it’s cheap, effective, and easy to access.

Aluminum and copper can both be used in many different commercial, residential, and industrial buildings. Each project will call for a specific setup, influenced by factors like cost, safety, and space. For more information, talk to us at Aaluminum Sheet & Wire.

Source: http://www.aaluminum.com/anodized-aluminum-blog/313-aluminum-wire-or-copper-wire-which-is-best.html

Aluminum Sheet Metal Becomes a Contender as Auto Industry Pushes for Lighter Vehicles

According to a new report, the car industry’s sheet metal sector is encouraging the development and implementation of more lightweight car frames.

aluminum-sheet-metal-becomes-a-contender-as-auto-industry-pushes-for-lighter-vehicles

The industry works in collaboration with several others, and last year, the top four companies made up two-fifths of the entire market when combined. Despite the minimal obstacles businesses have to overcome when entering the market, creating and running new sheet metal processing locations is expensive and material-heavy. For this reason, new companies don’t come flooding into the market.

The top companies in the automotive sheet metal industry consistently aim to create better products. Companies that constantly improve what they’re selling beat out competitors by intriguing customers and catering to desires. Those who put enough time, effort, and money into research and development will hold a greater market share worldwide.

Ambitious auto companies have begun to tackle international markets with specialized vehicles and outstanding passenger vehicles. The worldwide auto sheet metal industry is expected to experience a compound annual growth rate of 3.7% from 2017 to 2025. By this prediction, the $137.35 billion value will increase to $187.53 billion by 2025.

Although aluminum and aluminum sheet has been getting a lot of attention in the automotive industry lately, steel was last year’s biggest revenue contributor, making up three-fifths of the global market’s total. Steel will continue to be favoured by automakers over the next decade or so, according to recent market predictions.

The Asian Pacific market is currently in the lead in the auto sheet metal industry across the world. China in particular is expected to hold its place as a top consumer of passenger cars, driving the sheet metal industry as well as the continent’s overall market. If things continue to go this way, China may hold the number one spot in the world for the market sector by the end of 2025.

The 2010s have brought about a sharp increase in worldwide auto production, due largely in part by the growing need for passenger vehicles in many regions alongside the push to create less weighty vehicles with specialized alloys. These two key demands have allowed the auto sheet metal market to expand very quickly. A shift in environmental awareness has also brought about the release of electric vehicles and hybrid fuel vehicles, both of which will become more common in the coming years.

Vehicles are expected to become smaller and lighter in the near future to reduce their carbon footprint and save companies money. The price changes in aluminum and steel greatly affect the auto sheet metal market, and China remains the leader in the production of both steel and aluminum sheet. Due to recent legal violations, however, the country is beginning to downsize its production capacity.

The supply and demand of aluminum and steel has been fluctuating worldwide in recent years, causing companies to begin to worry about the accessibility and pricing of both metals. Largely influenced by global production, aluminum and steel will unsurprisingly have the greatest impact on the automotive industry and its lightweight vehicle building endeavour.

Source: http://www.aaluminum.com/anodized-aluminum-blog/312-aluminum-sheet-metal-becomes-a-contender-as-auto-industry-pushes-for-lighter-vehicles.html

Main Aluminum Smelter in China to Reduce Production

Kickstarted by the government’s penalizing of unlawful aluminum refining, China Hongqiao Group Limited has begun to reduce its production rate. As a result, smaller aluminum smelters in China have received market shares.

main-aluminum-smelter-in-china-to-reduce-production

The aluminum company is a large sector of Shandong Weiqiao Pioneering Group Company, and despite the importance of the situation, it failed to provide any information on how much it will reduce its production or how quickly the process will be executed when contacted for an estimate.

Knowledgeable insiders have claimed that the parent company began with a yearly reduction of 250,000 metric tons of aluminum on June 20th. These insiders wish to remain anonymous to protect themselves against any repercussions of giving out private information, and the attempt to request a comment from a Weiqiao company head was unsuccessful.

Recognizing its unbeatable title as the main aluminum producer in the world, the country is finally making a legitimate effort to make cuts to its aluminum refining, in hopes of minimizing the industry’s material surplus of aluminum sheet and abiding by legal rules once again.

In a rather sudden course of action this past April, China’s number one economic maintenance corporation ordered the shutdown of all aluminum smelters in the country that broke the rules of the industry’s environmental code. Several weeks earlier, the corporation planned to do the same during the winter season, the time of year when pollution is at its worst. These actions will quickly decrease the 40 million tons of aluminum that would have been processed this year.

These ambitious plans clearly demonstrate China Hongqiao Group Limited’s dedication to the government’s plan for the aluminum industry, and these plans also indicate a very real change occurring in the market, no matter how slowly that change is taking place. Even Xinjiang province, which houses the country’s second biggest aluminum supplier and producer, has begun to pay more attention to the environmental ramifications of all of its smelting locations.

Although it seems China is more dedicated to reducing its aluminum production, other high-production companies are still sceptical. China’s cuts have caused a significant increase in London Metal Exchange’s success, improving by more than one-tenth. Its aluminum is now valued at $1,892 per ton. Both the Aluminum Corporation of China Limited and Yunnan Aluminum Company have reaped the rewards of production cuts as well, experiencing price increases of 2.2% and 4.4% respectively.

Global Markets Asia inferred that 3.1 million tons of aluminum in China is unapproved, which makes up 8% of the whole country’s production capacity. More cuts are expected to follow later this year to target this problem, specifically the processing halts that will occur over the winter months. With these regulations in place, the surplus issue in the aluminum industry should be inexistent very soon.

Source:http://www.aaluminum.com/anodized-aluminum-blog/311-main-aluminum-smelter-in-china-to-reduce-production.html